升级到Ubuntu 9.10

话说某喜欢升级。有新的不用旧的。但见新人笑,也搂旧人哭。对人嘛那就不一样了。

话说回来,升级新版这样的事倒是很少失手。前几天失手过。从9.04升级到9.10beta,升级完成之后说什么也进入不了X。不过那天刚好9.10又出了一个版本。想来十分搞笑。以为原因。后来看到文章说9.10采用的乃是Grub2,于是知道自己范了一个不大不小的错误,恐怕当日升级十分成功,不过是grub2它老人家没有安装好。

所以本次升级先升grub2,见参考1之正文。
sudo apt-get install grub2
遇到下列两项:
Chainload from menu.lst? < -- Yes Linux command line: <-- ENTER sudo reboot之后出现: Error 11: Unrecognized device string 选择Chainload into GRUB 2 ,然后按e,将root换成uuid 按b启动系统,成功进行x之后再到terminal中使用: sudo upgrade-from-grub-legacy 大致如下: falko@falko-desktop:~$ sudo upgrade-from-grub-legacy

[sudo] password for falko:

Installing GRUB to Master Boot Record of your first hard drive …

Installation finished. No error reported.
This is the contents of the device map /boot/grub/device.map.
Check if this is correct or not. If any of the lines is incorrect,
fix it and re-run the script `grub-install’.

(hd0) /dev/sda

GRUB Legacy has been removed, but its configuration files have been preserved,
since this script cannot determine if they contain valuable information. If
you would like to remove the configuration files as well, use the following
command:

rm -f /boot/grub/menu.lst*

sudo reboot之后,grub2即搞定。

sudo update-manager -d升级到ubuntu 9.10成功。话说Ubuntu不象Windows,越是新版感觉起来越快,乖乖龙滴东~~~~

参考文章:
1.How To Install GRUB 2 On Ubuntu 9.04

打赏

发表评论

电子邮件地址不会被公开。 必填项已用*标注